1. Airmega air purifiers have been proven to capture airborne dust, pollen and dander based on testing conducted by KCL (Korea Conformity Laboratories). Testing was carried out in accordance with the Korea Air Cleaning Association standard (SPS-KACA 002-132:2022 Modified) to measure the removal rate of particles as small as 0.01ใ. Tests were conducted at maximum fan speed under standard room temperature and humidity conditions. Actual performance may vary depending on the userโs living environment. Tested with Airmega 50, 100, 150, Mighty AP-1512HH, C-Mighty AP-1512HHS, 350, 450. 2. Our HEPA filter complies with IEST-RP-CC007 standards, as tested by SGS (Sociรฉtรฉ Gรฉnรฉrale de Surveillance). Compliance was verified at fan speed level 1 for applicable models, and in Sleep mode for Airmega 50. SGS test reports reflect the evaluation of tested samples only and do not represent an assessment of the entire production batch. Tested with Airmega 100, 150, Mighty AP-1512HH, C-Mighty AP-1512HHS, 350, 450. 3. Tested by KCL (Korea Conformity Laboratories) in accordance with JEM 1467:2015 conditions. Results showed up to 99.5% reduction in acetic acid concentration within 60 minutes. Actual results may vary depending on the environment. Tested with Airmega 150, Mighty AP-1512HH. 4. Tested by KCL (Korea Conformity Laboratories) in accordance with SPS-KACA002-132:2022. Results demonstrated over 99.5% removal of common household gases, including ammonia, acetaldehyde, acetic acid, formaldehyde, toluene, benzene, nitrogen dioxide (NOโ), and sulphur dioxide (SOโ), within 30 minutes. Results may vary depending on the environment, and not all odours or gas particles may be removed. Tested with Airmega C-Mighty AP-1512HHS, 350, 450. 5. Testing was conducted using Coway Allergen filter media (5ร5 cm) placed in a polyethylene bag. The allergen solution and sample were immersed in 2 mL of phosphate buffer (100 ng/mL) before being heat-sealed to specimen size. The reaction was maintained at 4ยฐC for 24 hours. Testing was conducted by Nichinichi Pharmaceutical Co., Ltd. using ELISA to measure allergen concentration. Actual results may vary depending on the usage environment. Tested with Airmega Mighty AP-1512HH. 6. Removal rates of ammonia (NHโ) and hydrogen sulphide (HโS) were tested in a 1 mยณ chamber under EL608:2023 conditions over 30 minutes. Gas detector tubes were used for measurement, and testing was conducted by KCL (Korea Conformity Laboratories). Actual results may vary depending on the usage environment. Tested with Airmega Mighty AP-1512HH. 7. Reduction rates of naphthalene, sulphur dioxide, and nitrogen dioxide were tested using the Airmega Mighty AP-1512HH in a 1ใฅ chamber in accordance with JEM-1467:2015 standards. Testing was conducted by Intertek. Actual performance may vary depending on the living environment. Tested with Airmega Mighty AP-1512HH. 8. Tested by KCL (Korea Conformity Laboratories) in accordance with SPS-KACA002-132:2022. Testing was conducted using methyl mercaptan, isovaleraldehyde, and isovaleric acid in a 1.0ยฑ0.1 mยณ chamber over 60 minutes at (24ยฑ4)ยฐC and (46ยฑ10)% relative humidity. A removal rate of over 99.5% was achieved. Actual results may vary depending on the usage environment. Tested with Airmega 350, 450. 9. Tested by the Guangzhou Institute of Microbiology under ISO 4333-2022 standards, with filter media exposed to protein solutions for 24 hours. Results showed strong reduction performance: >99.79% for pollen, >99.60% for dog allergen, >99.90% for cat allergen, and >99.80% for dust mite allergen matter. Actual results may vary depending on room size, airflow, and pollutant levels. Tested with Airmega 350, 450. 10. Tested by KCL (Korea Conformity Laboratories) in accordance with SPS-KACA002-132:2022. Testing was conducted in a 1.0ยฑ0.1 mยณ chamber over 60 minutes at (24ยฑ4)ยฐC and (46ยฑ10)% relative humidity. A removal rate of >99.5% was achieved for formaldehyde and toluene within 60 minutes. Actual results may vary depending on the usage environment. Tested with Airmega 350, 450. 11. Tested by Intertek against designated test substances: sulphur dioxide, nitrogen dioxide, and naphthalene. Testing was conducted in a sealed 1.0ร1.0ร1.0 m (1.0 mยณ) odour chamber at a room temperature of (23ยฑ2)ยฐC (measured between 23.6โ23.9ยฐC) and relative humidity of (45ยฑ5)% R.H. (measured between 40โ48%). Results met an odour removal rate of โฅ99.9% for sulphur dioxide, nitrogen dioxide, and naphthalene. Actual results may vary depending on the usage environment. Tested with Airmega 350, 450.
